Scan Tool Data Definitions

DIM - Data List- Theft Lighting: The scan tool displays the status of the theft lighting output

DIM - Data List - Horn output: The scan tool displays the status of the horn output status

RIM - Data List - Battery Reconnect: The scan tool displays cause of alarm due to battery reconnect.

RIM - Data List - CTD State: The scan tool displays the state of the CTD system

RIM - Data List -Driver Door Jamb Sw.: The scan tool displays the status of the Driver Door Jamb Sw.

RIM - Data List - Hood Ajar Sw.: The scan tool displays the status of the Hood Ajar Sw.

RIM - Data List - Left Rear Door Jamb Sw.: The scan tool displays the status of the Left Rear Door Jamb Sw.

RIM - Data List - Pass. Door Jamb Sw.: The scan tool displays the status of the Pass. Door Jamb Sw.

RIM - Data List - Power Mode Change: The scan tool displays when the vehicles power source has changed from ON, IGN, or RAP

RIM - Data List -Rt. Rear Door Jamb Sw.: The scan tool displays the status of the Rt. Rear Door Jamb Sw.

RIM - Data List -Trunk Ajar Sw.: The scan tool displays the status of the Trunk Ajar Sw.

RIM - Data List - 8 Digit GM Part Number: The scan tool displays the control module part number.

VTD - Data List - Auto Learn Timer: The current state of the 10 minute timer, which must "time out" three times in order for the relearn procedure to be authorized.

VTD - Data List - Seed and Key Timer: This state must "time out" for the relearn to occur.

VTD - Data List - # of Learned Key Codes: The number of transponder values learned by the VTD controller module.

VTD - Data List - Ignition Counter: The module counts each time the ignition is cycled.

VTD - Data List - Security Lamp Status: The scan tool monitors the status of the security indicator in the instrument panel.

VTD - Data List - Auto Learn Timer: The current state of the 10 minute timer, which must "time out" three times in order for the relearn procedure to be authorized.

VTD - Data List - Clear Manufactures Enable Counter: Clears the final assembly data value, programmed at the factory