Vehicle Information Display

The vehicle information display parameters are available to the driver during the RUN power mode. The driver navigates through the various parameters displayed on the Driver Information Center (DIC) using the INFO Up and INFO Down DIC buttons. Some parameters can be reset using the INFO RESET button.

Some parameters require information from other modules via class 2 serial data messages. If the Instrument Cluster (IPC) has not received data for a parameter when the time has come to display the parameter, the IPC will blank the data on the DIC. If the IPC has determined that a class 2 communication failure with one of the modules exists when the time has come to display the parameter, the IPC will display dashes on the DIC.

The vehicle information display parameters are displayed in the following order:
1. Outside air temperature
2. Fuel range
3. Average fuel economy
4. Instantaneous fuel economy
5. Fuel used
6. Average vehicle speed
7. Timer
8. Battery Voltage
9. Engine oil life
10. Transmission fluid life
11. Cellular Telephone (W/UV8)
12. Feature Programming
13. Blank display

When the INFO Up button is pressed, the DIC will display the next parameter on the list. When the INFO Down button is pressed, the DIC will display the previous parameter on the list. When the blank display is currently being displayed and the INFO Up button is pressed, the DIC will display the outside temperature parameter.