Blower Motor and Fan Replacement

REMOVAL PROCEDURE




1. Remove the right side sound insulator.
2. Pull back the carpet near the blower motor.
3. Remove the IP compartment.
4. Remove the dash integration module from the bracket.
5. Remove the 2 rear dash integration module bracket screws.
6. Reposition the dash integration module bracket in order to remove the blower motor.




7. Disconnect the electrical connector (2) from the blower motor.
8. Remove the blower motor retaining fasteners (1).
9. Rotate and remove the blower motor from the vehicle.

INSTALLATION PROCEDURE




1. Install the blower motor. The blower motor will need to be rotated in order to install the motor into the housing.
2. Install the blower motor retaining screws (1).
3. Connect the electrical connector (2) to the blower motor.




4. Reposition the dash integration module bracket to its original position.
5. Install the 2 rear dash integration module bracket fasteners.
6. Install the IP compartment.
7. Reposition the carpet.
8. Install the right side sound insulator.