Programming Additional Keys Quick Learn Procedure--Keys Only pcs 25735

Quick Learn Procedure-Key Only

IMPORTANT:
- Additional master theft deterrent control keys (black) or valet keys (gray) may be added, up to 10 keys, using this procedure when there is an available learned master theft deterrent control key (black).

- This procedure adds keys only. This procedure does not erase previously learned keys.

- The keys to be learned must duplicate the mechanical cut of the current key.

- If more than one valet key (gray) is to be learned, each valet key must be immediately preceded by a learned master theft deterrent control key (black).

The "term" learn or learned refers to copying the driver's key and system information to additional keys. To learn another ignition key, it is necessary to first create a duplicate of the mechanical cut of the current key. The ignition key being learned must be read by the theft module in the following sequence. A drivers key must be used to learn any additional keys.

1. With a previously learned master theft deterrent control key (black), turn ON the ignition, with the engine OFF.

2. Turn OFF the ignition and remove the key.

3. Within 10 seconds, insert the key to be learned (black or gray) and turn ON the ignition, with the engine OFF. The vehicle has now learned the new key.