Arming the CTD system

Use the following procedure in order to arm the system:
1. Close the rear compartment lid and hood (export only).
2. Close all the windows and place the shift lever in P (park).
3. Ignition switch in OFF.
4. Open any door.
5. Lock the doors with the power door lock switch or the LOCK button on the transmitter.
6. Close all doors.
7. Wait 30 seconds, until the security indicator turns off. The system is now armed.

IMPORTANT: The system is not armed it the doors are locked manually, the power door lock switch or remote transmitter must be used to arm the CTD system.