Coolant Heater Replacement- Right

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Disconnect the electrical connector at the block heater.
3. Remove the block heater retaining bolt.
4. Remove the block heater.

Installation Procedure





1. Install the block heater.


Notice: Refer to Fastener Notice in Service Precautions.

2. Install the block heater retaining bolt.
Tighten the block heater retaining bolt to 10 Nm (89 inch lbs.).
3. Connect the electrical connector to the block heater.
4. Lower the vehicle.