Torque Converter Cover: Service and Repair

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Support the vehicle on safety stands.
3. Remove the engine to transmission brace.
4. Remove the attaching bolts (5).
5. Remove the torque converter cover.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the torque converter cover.
- Tighten the cover bolt to 12 Nm (106 inch lbs.).
2. Install the engine-to-transmission brace and attaching bolts (5).
- Tighten the bolts to 47 Nm (35 ft. lbs.).
3. Remove the safety stands.
4. Lower the vehicle.