Instrument Panel Cluster (IPC) - Setting or Changing the Personalization Features

1. Gear selector in PARK.
2. Ignition switch ON.
3. Press the ON button. The DIG displays a status message.
4. Press the INFO UP button, until the FEATURE PROGRAMMING OFF message is displayed.
5. Press the ON button. The personalization mode is activated and the FEATURE PROGRAMMING ON message is displayed.
6. Press the INFO DOWN button, until the desired personalization feature is displayed. The current feature setting is conveyed to the right of the feature message.
7. Press the ON/OFF button. The current setting toggles through available settings for the displayed feature.
8. Press the INFO DOWN button. The class 2 message associated with the feature setting is sent to the appropriate system. This is done regardless of change, i.e. even if the setting has not changed it will be sent out. The next feature option is displayed.
9. Press the INFO DOWN until the FEATURE PROGRAMMING ON message is displayed.
10. Press the INFO RESET button. The personalization mode is terminated and the FEATURE PROGRAMMING OFF message is displayed.