Installation Procedure

1. Install the rear seat belt buckle anchor plates under the rear seat back hold-down.

Important: Assure that the bolt threads and bolt holes are free of any sealer patch material.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear seat center belt and RH rear seat buckle anchor bolt. Ensure the center belt anchor is facing rearward and the center buckle anchors are facing towards then front.

Tighten
Tighten the rear seat center belt and rear seat buckle anchor bolts to 41 N.m (30 lb ft).

3. Ensure the seat belt buckles are stowed in the seat back pockets and install the rear seat cushion.