Removal Procedure

1. Disable the SIR system.
2. Remove the passenger seat.
3. Remove the passenger carpet retainer.
4. Lift up the carpet and insulation in order to access the Inflatable Restraint sensing and the diagnostic module (SDM).
5. Remove the Connector Position Assurance (CPA) (3) from the SDM harness connector (2).
6. Disconnect the SDM harness connector (2) from the SDM (1).
7. Remove the SDM (6) mounting fasteners (1).
8. Remove the SDM (6) from the floor sheetmetal (2).