Rear Integration Module Replacement

REMOVAL PROCEDURE
Before replacement of the rear integration module record the personalization settings (if equipped). Program the new module with the personalization settings after replacement.
1. Remove the rear seat cushion.
2. Remove the rear seat back.
3. Move the rear seat back insulator aside.
4. Disconnect the rear integration module electrical connectors (3).
5. Remove the rear integration module.

INSTALLATION PROCEDURE
1. Install the rear integration module.
2. Connect the electrical connectors (3).
3. Reposition the rear seat back insulator.
4. Install the rear seat back.
5. Install the rear seat cushion.
6. Perform the vehicle personalization to reset the owner's desired personalization settings. Refer to BCM Programming/RPO Configuration. Testing and Inspection