Turn Signals: Service and Repair

Repeater Lamp Replacement




REMOVAL PROCEDURE
1. Using a thin flat bladed tool, push in on the release tab at the rear of the repeater lamp (3).
2. Remove the repeater lamp (3) from the front fender (1).
3. Disconnect the lamp socket (2) from the repeater lamp (3).

INSTALLATION PROCEDURE
1. Connect the lamp socket (2) to the repeater lamp (3).
2. Install the repeater lamp (3) to the front fender (1).
3. Press the rear of the repeater lamp (3) to engage the tab with the front fender (1).