Position Lamps (Export)

Battery positive voltage (B+) is supplied at all times to the STANDING LP relay coil and switch in the rear compartment relay center via CKT 3140 (ORN) from the rear fuse block EXPORT LGT Fuse. Battery positive voltage (B+) is supplied through the normally closed relay contacts of the STANDING LP relay to the POSN LP R relay coil and the POSN LP L relay coil in the rear compartment relay center via CKT 1430 (WHT). When the gear selector is in the PARK position, the Dash Integration Module (DIM) grounds the STANDING LP relay coil via CKT 1429 (BRN) removing battery positive voltage (B+) from the POSN LP R relay and POSN LP L relay. The position lamps light only with the ignition switch in the OFF position.

Battery positive voltage (B+) is supplied at all times to the POSN LP R relay normally open switch via CKT 3140 (ORN) from the rear fuse block EXPORT LGT Fuse. When the headlamp switch is placed in the RH PARK position, the POSN LP R relay coil is grounded via CKT 1432 (DK BLU) through the headlamp switch RH PARK switch contact and CKT 351 (BLK/WHT). The coil is energized, closing the switch contacts from the normally open position. Battery positive voltage (B+) then is supplied to the RH position lamp and the RH tail/stop lamp via CKT 1473 (BRN/WHT). The position lamp and tail/stop lamp are permanently grounded via CKT 1050 (BLK) to G401, so the RH position lamp has power and ground, and then lights. When the POSN LP R relay is in its normally closed position, battery positive voltage (B+) is supplied via CKT 309 (BRN/WHT) through the relay to the RH position lamp and the RH tail/stop lamp via CKT 1473 (BRN/WHT).

Battery positive voltage (B+) is supplied at all times to the POSN LP L relay normally open switch via CKT 3140 (ORN) from the rear fuse block EXPORT LGT Fuse. When the headlamp switch is placed in the LH PARK position, the POSN LP L relay coil is grounded via CKT 1431 (LT GRN) through the headlamp switch LH PARK switch contact and CKT 351 (BLK/WHT). The coil is energized, closing the switch contacts from the normally open position. Battery positive voltage (B+) then is supplied to the LH position lamp and the LH tail/stop lamp via CKT 1472 (PPL). The position lamp and tail/stop lamp are permanently grounded via CKT 1050 (BLK) to G401, so the RH position lamp has power and ground, and then lights. When the POSN LP L relay switch is in its normally closed position, battery positive voltage (B+) is supplied via CKT 709 (PPL) through the relay to the LH position lamp and the LH tail/stop lamp via CKT 1472 (PPL).