Driver No. X (1 or 2)

Warning/Status Message List:

When the RFA module detects the transmitter (driver 1 or 2) is used in order to unlock the vehicle, the RFA module sends a class 2 serial data message to the IPC requesting that the appropriate message is displayed. The DIC messages DRIVER NO 1 or DRIVER NO 2 may be changed in order to display a name or phase. Use the following procedure:
1. Connect a scan tool.
2. Turn the ignition switch to the ON position.
3. Select the IPC System.
4. Select the appropriate driver name menu.
5. Using the ACSII character table above, select the appropriate number to display the desired character.