Compass Variance Setup

PROCEDURE
1. Determine the correct zone location.
2. Use the following procedure in order to display the current compass zone setting:
2.1. Insert the end of a paper clip into the hole on the bottom of the mirror.
2.2. Press the calibration switch.
3. Press and hold the switch for 5 seconds or until a zone number appears in the display.
4. In order to change the current zone setting, press and hold the calibration switch until the correct zone appears.

Release the switch. The compass direction appears within a few seconds.
The zone settings are not lost when the mirror or ignition switch is turned to the OFF position. The zone requires resetting only when the vehicle is outside of the zone's setting.

Compass Variance Setup Description: North American Countries:

NORTH AMERICAN COUNTRIES

POSITION SETTING (ZONES) FOR NORTH AMERICA

African And European Countries:

AFRICAN AND EUROPEAN COUNTRIES

POSITION SETTINGS (ZONES) FOR AFRICA AND EUROPEAN COUNTRIES

The automatic day-night mirror has an AUTOCAL compass. The mirror automatically calibrates in order to prevent the vehicle's unique magnetic fields from causing the mirror to display the wrong compass direction. This calibration happens during normal driving conditions. When the compass is calibrating, a C is displayed. The calibration is complete when the C in the display changes to the correct directional heading. Once calibrated, the mirror does not need to be recalibrated. The calibration is not lost when the mirror or the ignition switch is turned to the OFF position