Radiator Cooling Fan Motor: Service and Repair
Removal Procedure1. Remove the radiator.
2. Remove the fan retaining nut (5) from the motors (2).
3. Remove the fan (4) from the motor shaft
4. Remove the motor retaining screws (3).
5. Remove the motor (2) from the shroud (1).
Installation Procedure
1. Install the motor (2) to the shroud (1).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the motor retaining screws (3).
- Tighten the fan motor mounting screws to 6 Nm (53 inch lbs.).
3. Install the fan blade (4) to the motor shaft.
4. Install the fan blade retaining nut (5) to the motor (2).
- Tighten the fan blade retaining nut to 6 Nm (53 inch lbs.).
5. Install the cooling fan assembly to the radiator.
6. Install the radiator to vehicle.