Express Folding Mirror (Japan Only)

The mirror select switch on the LH front power window switch is placed in L or R to indicate the mirror to be folded. The LH front power window switch receives the active high input from the mirror select switch and also receives an active high input from the express fold mirror switch when the switch is actuated. The LH front power window switch then sends a message on the Simple Bus Interface (SBI) to the driver door module or the passenger door module depending on the position of the mirror select switch indicating that the mirror switch need to be folded. Each mirror has a reversible motor that the door modules control by supplying Battery Positive Voltage (B+) and ground to the motor. The express folding mirrors will either extend or retract to the end of travel and will not stop in between. For a mirror extend, the door module supplies Battery Positive Voltage (B+) via CKT 190 (PNK) and ground via CKT 191 (ORN) to the mirror power fold motor until the mirror fully extends. For a mirror retract, the door module supplies Battery Positive Voltage (B+) via CKT 191 (ORN) and ground via CKT 190 (PNK) to the mirror power fold motor until the mirror fully retracts.