Instrument Panel (IP) - Accessory Trim Plate Replacement - Left Side (RHD)

REMOVAL PROCEDURE




CAUTION: Refer to SIR Handling Caution in Cautions and Notices.

1. Disable the SIR. Refer to Disabling the SIR System in SIR.
2. Remove the Instrument Panel (IP) upper trim pad.
3. Remove the fasteners from the trim panel to IP retainer.
4. Remove the inflatable restraint instrument panel module.




5. Remove the 2 fasteners from the straps at the carrier.
6. Pull the trim panel rearward in order to remove.

INSTALLATION PROCEDURE



1. Align the trim panel to the IP retainer.
2. Install the trim panel fastener to the IP retainer.




3. Install the strap fasteners to the carrier.
4. Install the inflatable restraint instrument panel module.
5. Install the IP upper trim pad.
6. Enable the SIR. Refer to Enabling the SIR System in SIR.