Instrument Panel (IP) - Accessory Trim Plate Replacement - Left Side (LHD)

REMOVAL PROCEDURE

CAUTION: Refer to SIR Handling Caution in Cautions and Notices.

1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
2. Remove the Instrument Panel (IP) upper trim pad.
3. Remove one fastener near the IP cluster at IP retainer.
4. Lift the outboard end of the trim plate to disengage locating tab and pull rearward.

INSTALLATION PROCEDURE
1. Align the woodgrain trim panel to the IP retainer.
2. Install the fastener from the trim panel to the IP retainer.
3. Install the IP upper trim pad.
4. Enable the SIR system. Refer to Enabling the SIR System in SIR.