Console Trim Plate Replacement

REMOVAL PROCEDURE
1. Block the wheels of the vehicle.
2. Put the shifter lever in NEUTRAL.
3. Open the console door.
4. Lift upward on the rear edge of the console trim panel (1) and pull rearward.
5. Disconnect the electrical connectors as necessary.

INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Guide the forward edge of the trim panel (1) into the lower IP opening.
3. Align the trim panel retainers to the top of console and press down firmly to engage.
4. Close the console door.
5. Put the shifter in PARK.
6. Remove the blocks from the wheels.