B3108

DTC B3108 Transmitter Synchronization Failure:

DTC B3108 Transmitter Synchronization Failure (Part 1 Of 2):

DTC B3108 Transmitter Synchronization Failure (Part 2 Of 2):

CIRCUIT DESCRIPTION
The RKE module runs this test every time the module processes a message from the transmitters.

CONDITIONS FOR SETTING DTC
The module will set this DTC if it receives a transmission from a out of sync transmitter.

ACTION TAKEN WHEN THE DTC SETS
The RFA module stores a DTC B3108 as current. No driver warning message is displayed for this DTC.

CONDITIONS FOR CLEARING DTC
The RKE module will clear this DTC after a transmission is received from a valid transmitter.

DIAGNOSTIC AIDS
This DTC will stay in memory as current until it receives a valid transmission from the RKE transmitters, then as history until cleared.