Torque Converter Cover: Service and Repair

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Support the vehicle on safety stands.





3. Remove the attaching bolts (5) and the engine-to-transmission brace.
4. Remove the torque converter cover.

Installation Procedure
1. Install the torque converter cover.





Notice: Refer to Fastener Notice in Service Precautions.

2. Install the torque converter cover bolts.
Tighten the cover bolt (5) to 12 Nm (106 inch lbs.).
3. Install the engine-to-transmission brace and attaching bolts.
Tighten the bolts to 47 Nm (35 ft. lbs.).
4. Remove the safety stands.
5. Lower the vehicle. Refer to Vehicle Lifting.