Procedure to Set Up A New Dim Module
TOOLS REQUIREDScan Tool
1. Connect a Scan Tool to the Data Link Connector (DLC).
2. Turn ON the ignition, with the engine OFF.
3. Under the DIM Main Menu, select Special Functions.
Under the Special Functions menu, one of the choices is New VIN.
4. The user selects one of the following:
^ New VIN, (to continue with the procedure).
^ Exit, to go back to Special Functions menu.
5. After the user chooses New VIN, follow the Scan Tool on screen instructions to edit VIN:
^ Press Save to save VIN information.
^ Press Done to go back to Special Functions menu.
6. Under the Special Functions menu, one of the choices is Setup SDM Serial Number in DIM.
7. The user selects one of the following:
^ Setup SDM Serial Number in DIM, (to continue with the procedure).
^ Exit, to go back to Special Functions menu.
5. After the user chooses Setup SDM Serial Number in DIM, the Scan Tool displays a screen as follows:
^ Do you want to set up a Dash Integration Module?
^ Press Yes to set up module.
^ Press No to Exit.
9. Choose Yes or No
^ If the user selects No, the Scan Tool display returns to the DIM Special Function Menu.
^ If the user selects Yes, the Scan Tool displays Initializing New Module.
10. Once complete, the Scan Tool displays Module Initialized.
11. To complete the procedure, select the following:
12. EXIT: Go to Special Functions Menu
13. Under the Special Functions menu, one of the choices is Set Options.
14. The user selects one of the following:
^ Set Options, (to continue with the procedure).
^ Exit, to go back to Special Functions menu.
15. Under the Set Options menu, The user selects one of the following:
^ Point of Sale, (to continue with the procedure) follow the Scan Tool on screen instructions to Select the Point of Sale.
^ Miscellaneous Options #1, (to continue with the procedure) follow the Scan Tool on screen instructions to Select the RPO option configuration.
^ Miscellaneous Options #2, (to continue with the procedure) follow the Scan Tool on screen instructions to Select the RPO option configuration.
^ Miscellaneous Options #3, (to continue with the procedure) follow the Scan Tool on screen instructions to Select the RPO option configuration.
^ Exit, to go back to Special Functions menu.