Coolant Heater Replacement (Left)

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lift Points.
2. Remove the front air deflector.
3. Disconnect the electrical connector at the engine block heater.
4. Remove the coolant heater retaining bolt.





5. Remove the coolant heater.

Installation Procedure





1. Install the coolant heater.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the coolant heater retaining bolt.
^ Tighten the coolant heater retaining bolt to 9 Nm (80 inch lbs.).
3. Connect the electrical connector to the coolant heater.
4. Install the front air deflector.
5. Lower the vehicle.