Navigation Data Processor Replacement

REMOVAL PROCEDURE



1. Remove the upper trunk trim.
2. Remove the fasteners retaining the navigation data processor to the bracket.
3. Gently slide the navigation data processor out of the mounting bracket until the electrical connectors can be removed.




4. Disconnect the electrical connectors.
5. Remove the navigation data processor.

INSTALLATION PROCEDURE



1. Install the navigation data processor far enough into the mounting bracket that the electrical connectors can be connected.
2. Connect the electrical connectors.
3. Install the navigation data processor completely into the mounting bracket.





NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the fasteners to the navigation data processor and bracket assembly.

Tighten
Tighten the fasteners to 5 N.m (44 lb in).

5. Install the upper trunk trim.