SIR Module Cover Replacement
SIR Module Cover ReplacementREMOVAL PROCEDURE
1. Disable the SIR system.
2. Remove the access panel from the right side of the instrument panel.
3. Remove the screw from the outer air deflector.
4. Remove the air deflector.
5. Open the instrument panel compartment.
6. Remove the lower module cover screws.
7. Remove the upper module cover bolt.
8. Remove the inflatable restraint module cover from the instrument panel.
INSTALLATION PROCEDURE
1. Install the inflatable restraint module cover to the instrument panel.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the upper module cover bolt.
Tighten
Tighten the upper module cover bolt to 3 N.m (27 lb in).
3. Install the lower module cover screws.
Tighten
Tighten the lower module cover screws to 8 N.m (71 lb in).
4. Close the instrument panel compartment.
5. Install the air deflector.
6. Install the screw to the outer air deflector.
7. Install the right side access panel.
8. Enable the SIR system.