Inflatable Restraint Side Impact Module Replacement

Description:

Removal Procedure
1. Disable SIR system. Refer to Disabling the SIR System
2. Remove front door trim panel.
3. Remove front door water deflector.
4. Disconnect Inflatable Restraint Side Impact Sensor electrical connector.
5. Remove two Torx (R) headed screws.
6. Remove sensor from mounting plate.

Installation Procedure
1. Install sensor to mounting plate.

Notice: Refer to Service Precautions.

2. Install two Torx� headed screws.

Tighten
Tighten Inflatable restraint side impact screws to 5 N.m (45 lb in).

3. Connect Inflatable Restraint Side Impact Sensor electrical connector.
4. Install front door water deflector.
5. Install front door trim panel.
6. Enable SIR system. Refer to Enabling the SIR System.