General Information

^ An adjusting screw on the upper inboard side of the headlamp is available for horizontal headlamp aim adjustment.




^ The horizontal aim is preset at the factory. The horizontal aim generally will not require adjustment.
^ Use the screen method to adjust the horizontal aim. Refer to Headlight Aiming.
^ A knob located on the back of the headlamp provides a point of reference when adjusting to the left or to the right. This reference knob will not determine the degree of aim. Do not use the reference knob to set the headlamp aim.




^ An adjusting screw on the upper outboard side of the headlamp is available to set the vertical headlamp aim.




^ Use the integrated adjustment bubble or use the screen method to set the vertical aim. Refer to Headlight Aiming.
Adjust the bubble until the bubble is in the middle of the 0 (zero) on the level to set the vertical aim with the integrated bubble.