Coolant Pipe Replacement - Intake
Removal Procedure1. Drain the engine coolant.
2. Remove the transmission.
3. Remove the following intake pipe components:
^ The heater core bypass hose
^ The intake pipe hose (1)
^ The radiator outlet hose (2)
^ The support bolt (3)
^ The bolts (5)
4. Slide the coolant intake pipe (4) rearward under the front of the cowl in order to remove.
5. Remove the intake pipe seal (6).
Installation Procedure
1. Install the intake pipe seal (6).
2. Slide the coolant intake pipe (4) under the front of the cowl and forward into the proper mounting position.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the following intake pipe components:
^ The coolant intake pipe bolts (5).
^ Tighten the bolts to 20 Nm (15 ft. lbs.).
^ The support bolt (3).
^ Tighten the bolt to 20 Nm (15 ft. lbs.).
^ The radiator outlet hose (2)
^ The intake pipe hose (1)
^ The heater core bypass hose
4. Install the transmission.
5. Fill the cooling system.