Lock Rod Knob Replacement - Door

REMOVAL PROCEDURE




1. Pull up on the lock knob in order to expose the orange tab.
2. Pry out on the orange tab with a screwdriver in order to release the knob. Discard the orange tab.
3. Remove the bezel screw.
4. Remove the bezel from the trim panel.

INSTALLATION PROCEDURE




1. Install the bezel to the trim panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the bezel screw.

Tighten
Tighten the bezel screw until fully seat but not stripped.




3. Install the lock knob
4. Insert the new orange tab into the slot.
5. Push the knob into position.