Tilt/Telescoping Column Positions - With Memory

On vehicles with memory, the tilt/telescope steering column can be set to store six possible positions: three possible entry positions and three possible exit positions. These settings may be enabled or disabled by using personalization setup procedures with the driver information center (DIC). Using the DIC, it is possible to enable all three entry positions or disable them all. Similarly, the exit positions may be all enabled or all disabled. The positions of the tilt/telescope steering column that may be store are as follows:
^ Default exit position (all forward, all up).
^ Driver 1 exit position, set using the memory; switches.
^ Driver 2 exit position, set using the memory switches.
^ Last known driver exit position (when ignition was previously turned OFF).
^ Driver 1 entry position, set using the memory switches.
^ Driver 2 entry position, set using the memory switches.