With RSS/CVRSS

ADJUSTMENT PROCEDURE
1. Check for rear position sensor DTCs (C1762 and C1763).

Important: If DTCs are present, correct the condition before continuing.

2. Park the vehicle on a level surface with doors closed, and no passengers or additional weight on-board.
3. Connect the scan tool to the Data Line Connector (DLC).
4. Turn the ignition ON with the engine off.
5. Check the rear CVRSS position sensor values with the scan tool. If the sensor values are out of range, check for one of the following conditions:
^ Bent CVRSS position sensor brackets.
^ Bent or disconnected position sensor links.