Headlamp Switch: Service and Repair
REMOVAL PROCEDUREHeadlamp Switch Replacement: Removal Procedure:
The headlamp switch uses skin locks which grab the soft skin material of the IP. The skin lock feature may cause the switch to be hard to remove.
1. Remove left IP end cap.
2. Push on rear side of headlamp switch.
3. Remove electrical connectors as necessary.
INSTALLATION PROCEDURE
Headlamp Switch Replacement: Installation Procedure:
1. Reconnect electrical connectors.
2. Align headlamp switch with opening in IP and push into position until flush with IP surface.
3. Install left IP end cap.