Oil Pick Up/Strainer: Service and Repair

REMOVAL PROCEDURE





1. Remove the transmission assembly.
2. Remove the exhaust crossover pipe.
3. Remove the engine oil pan.
4. Remove the support nut and the mounting bolt and remove the pickup pipe.

INSTALLATION PROCEDURE





1. Lubricate the silicone seal in the oil manifold plate. With a twisting motion, install the end of the oil pump pick-up tube (1).
2. Install the oil pump pick-up retaining bolt (3) and nut (2).
^ Tighten the oil pump pick-up tube nut to 24 Nm (18 ft. lbs.).
^ Tighten the oil pump pick-up tube bolt to 10 Nm (89 in. lbs.).

3. Install the oil pan.
4. Install the exhaust crossover pipe.
5. Install the transmission assembly.