General Description

The LH and RH power seat system each consist of the seat switch and five reversible motors (front height, rear height, forward/back, recline, and headrest) which operate independently of each other. Each motor contains an electronic circuit breaker (PTC), which will reset only after voltage has been removed from the motor. Battery positive voltage (B+) is supplied at all times to each seat switch via CKT 3740 (ORN) from the rear junction block PWR SEAT circuit breaker. The LH seat switch is supplied ground via CKT 550 (BLK) to G302. The RH seat switch is supplied ground via CKT 650 (BLK) to G302.