Windshield Defroster Grille Replacement

REMOVAL PROCEDURE

Defroster Grille Replacement (LHD): Removal Procedure:

1. Disable the SIR. Refer to Disabling the SIR System in SIR.
2. Remove instrument panel upper trim panel.
3. Remove fasteners (2) securing defroster grille to IP carrier.
4. Remove defroster grille (3).
5. Disconnected sensors from defroster grille. Refer to Sunload and Twilight Sentinel Sensor Replacement (LHD). Sun Load Sensor

INSTALLATION PROCEDURE

Defroster Grille Replacement (LHD): Installation Procedure:

1. Connect sensors to defroster grille. Refer to Sunload and Twilight Sentinel Sensor Replacement (LHD).
2. Align defroster grille (3) with IP carrier.
3. Install fasteners (2) from defroster grille to carrier.

Tighten
Tighten the defroster grille fasteners to 2 Nm (18 lb in).

4. Install instrument panel upper trim panel.
5. Enable the SIR. Refer to Enabling the SIR System in SIR.