Right

REMOVAL PROCEDURE

Trim Plate Replacement - IP Accessory (Right): Removal Procedure:

1. Disable SIR. Refer to Disabling the SIR System in SIR.
2. Remove IP upper trim pad.
3. Remove two fasteners from trim panel to IP retainer.
4. Remove PSIR module.

Trim Plate Replacement - IP Accessory (Right): Removal Procedure:

5. Remove two fasteners from straps at carrier.
6. Pull rearward on trim panel to disengage three snap clips and remove trim plate.

INSTALLATION PROCEDURE

Trim Plate Replacement - IP Accessory (Right): Installation Procedure:

1. Align trim panel to IP retainer.
2. Push forward on trim plate to engage the three snap clips while aligning the A/C housings to A/C ducts.
3. Install the two fasteners from trim panel to IP retainer.

Trim Plate Replacement - IP Accessory (Right): Installation Procedure:

4. Install fasteners from straps to carrier.
5. Install IP upper trim pad.
6. Install PSIR.
7. Enable SIR. Refer to Enabling the SIR System in SIR.