Left

REMOVAL PROCEDURE

Trim Plate Replacement - IP Accessory (Left): Removal Procedure:

1. Disable the SIR. Refer to Disabling the SIR System in SIR.
2. Remove IP upper trim pad.
3. Remove one fastener near IP cluster at IP retainer.
4. Lift outboard end of trim plate to disengage locating tab and pull rearward.

INSTALLATION PROCEDURE

Trim Plate Replacement - IP Accessory (Left): Installation Procedure:

1. Align woodgrain trim panel to IP retainer.
2. Install fastener from trim panel to IP retainer.
3. Install IP upper trim pad.
4. Enable the SIR. Refer to Enabling the SIR System in SIR.