Assist Rod Ball Stud

REMOVAL PROCEDURE

Assist Rod Ball Stud Replacement - Hood: Removal Procedure:

1. Open the hood.
2. Release the clip retaining the hood assist rod to the lower hood assist rod ball stud (1).
3. Remove the lower hood assist rod ball stud (1) from the fender (2).

Assist Rod Ball Stud Replacement - Hood: Removal Procedure:

4. Release the clip retaining the hood assist rod to the upper hood assist rod ball stud (2).
5. Remove the upper hood assist rod ball stud (2) from the hood (1).

INSTALLATION PROCEDURE

Assist Rod Ball Stud Replacement - Hood: Installation Procedure:

1. Install the upper hood assist rod ball stud (2) to the hood (1).

Tighten
Tighten the upper hood assist rod ball stud (2) to 9 N.m (80 lb in).

2. Press the hood assist rod onto the upper hood assist rod ball stud (2).
3. Ensure that the clip is fully seated on the hood assist rod.

Assist Rod Ball Stud Replacement - Hood: Installation Procedure:

4. Install the lower hood assist rod ball stud (1) to the fender (2).

Tighten
Tighten the lower hood assist rod ball stud (1) to 9 N.m (80 lb in).

5. Press the hood assist rod onto the lower hood assist rod ball stud (1).
6. Ensure that the clip is fully seated on the hood assist rod.
7. Close the hood.