Window Belt Inner

REMOVAL PROCEDURE

Sealing Strip - Front Door Window Belt Inner: Removal Procedure:

1. Remove door trim panel.
2. Remove the door frame garnish molding.
3. Starting at one end of the door window inner belt molding (1), pull upward to release molding.

INSTALLATION PROCEDURE

Sealing Strip - Front Door Window Belt Inner: Installation Procedure:

1. Position the door window inner belt molding (1) over the flange of the door inner panel (3).
2. Pressing down, engage the door window inner belt molding the entire length.
3. Install the door frame garnish molding.
4. Install the door trim panel.