Window Belt Inner

REMOVAL PROCEDURE

Sealing Strip Replace - Rear Door Window Belt Inner: Removal Procedure:

1. Remove the door trim panel.
2. Remove door window garnish molding.
3. Starting at one end of the door window inner belt molding (1), pull upward to release the molding.

INSTALLATION PROCEDURE

Sealing Strip Replace - Rear Door Window Belt Inner: Installation Procedure:

1. Position the door window belt molding (1) over the flange of the door inner panel.
2. Position the notch in the belt molding to the rear stationary window frame.
3. Pressing down, engage the door window inner belt molding the entire length.
4. Install the door window garnish molding.
5. Install the door trim panel.