Window

REMOVAL PROCEDURE

Window Replacement - Rear Door: Removal Procedure:

1. Remove the door trim panel.
2. Remove the water deflector.

CAUTION: When working with any type of glass, use approved safety glasses and gloves to reduce the chance of personal injury.

3. Remove the rear stationary window.
4. Locate the window clamps (2) on the regulator and loosen the bolts.
5. Remove the window (1) by pulling it up and out of the door assembly.

INSTALLATION PROCEDURE

Window Replacement - Rear Door: Installation Procedure:

1. Install the window (1) down into the door assembly.
2. Install the rear stationary window.
3. Locate the window into the two clamps.
4. Connect a power source to the window motor and run the window to the full up position.

Tighten
Tighten the window clamp bolts to 11 N.m (97 lb in).

5. Install water deflector.
6. Install door trim panel.
7. Check the window and door controls for proper operation.