PASS-Key Reader/Exciter

REMOVAL PROCEDURE

PASS-Key Reader/Exciter Replacement: Removal Procedure:

1. Remove ignition lock cylinder.
2. Remove the bezel from the ignition lock cylinder, by releasing retainers.

PASS-Key Reader/Exciter Replacement: Removal Procedure:

3. Slide reader/exciter (4) from ignition lock cylinder housing (1).

INSTALLATION PROCEDURE

PASS-Key Reader/Exciter Replacement: Installation Procedure:

1. Align reader/exciter (4) with ignition lock cylinder housing (1) and install. cylinder bezel.
2. Install ignition lock cylinder bezel.
3. Install ignition lock cylinder.