B1760

DTC B1760 CD Changer Not Responding:

CIRCUIT DESCRIPTION
The radio and the remote Compact Disc (CD) changer communicate through the E & C serial data line CKT 835 (DK GRN).

CONDITIONS FOR SETTING THE DTC
The radio (IRC) performs this DTC test when the radio power cycles from off to on.
The diagnostic for this DTC does not run if DTC B1982 or DTC B1983 is set.
The radio sets the current status for this DTC when it detects a loss of E&C communication with the CD changer. If the CD changer does not respond. the radio ignores the CD changer.

ACTION TAKEN WHEN THE DTC SETS
No driver warning message will be displayed for this DTC. The CD changer does not operate as long as the DTC is set.

CONDITIONS FOR CLEARING THE DTC
^ This DTC clears (status changes from current to history) when the radio (IRC) no longer detects the conditions which caused the DTC to set.
^ A history DTC clears after 50 consecutive ignition cycles if the condition for the malfunction is no longer present.

DIAGNOSTIC AIDS
Refer to Diagnostic Table.

TEST DESCRIPTION
The numbers below refer to the step numbers on the diagnostic table:
2. This step checks that the E and C serial data line between the radio and the compact disc player is OK.