Canister Purge Control Valve: Service and Repair

REMOVAL PROCEDURE

1. Raise the vehicle.

2. Dis-connect the EVAP canister vent valve (2) electrical connector.

3. Remove the hose from the EVAP vent valve.

4. Remove the EVAP canister vent valve bolt.

5. Remove the EVAP canister vent valve from the vehicle.


INSTALLATION PROCEDURE

1. Install the hose to the EVAP vent valve (2).

2. Install the EVAP canister vent valve bolt.

^ Tighten the bolt to 6 N.m (53 lb. in).

3. Connect the EVAP canister vent valve electrical connector.

4. Lower the vehicle.