Reveal Molding Retainer Replacement (Rear)

REMOVAL PROCEDURE

Reveal Molding Retainer Replacement (Rear): Removal Procedure:

CAUTION: When working with any type of glass, use approved safety glasses and gloves to reduce the chance of personal injury.

1. Remove rear window reveal molding.
2. Use a plastic tool to assist in pushing away from the rear window while working the reveal molding retainers (2) out of the pinchweld to remove the reveal molding retainers (2) from the upper section and from the lower section of the rear window.

INSTALLATION PROCEDURE

Reveal Molding Retainer Replacement (Rear): Installation Procedure:

1. Install the reveal molding retainers to the upper section of the rear window.
2. Install the reveal molding retainers to the lower section of the rear window.

IMPORTANT: It rear window reveal molding retainers can not be properly installed due to the rear window fit or urethane interference remove the rear window.

3. Install rear window reveal moldings.