Fog and Cornering Lamp Replacement
REMOVAL PROCEDUREFog And Cornering Lamp Replacement: Removal Procedure:
1. Raise and suitably support the vehicle.
2. Remove the corning lamp socket from the fog and cornering lamp.
3. Remove the wire harness from the loom on the fog and cornering lamp.
4. Out the plastic tie-wrap to remove the connector from the fog and cornering lamp.
Fog And Cornering Lamp Replacement: Removal Procedure:
5. Remove the electrical connection from the fog and cornering lamp.
6. Remove the screws from the fog and cornering lamp.
7. Remove the fog and corning lamp.
8. Transfer the fog lamp bulb.
INSTALLATION PROCEDURE
Fog And Cornering Lamp Replacement: Installation Procedure:
1. Install the fog and cornering lamp.
2. Install the fog and cornering lamp screws.
Tighten
Tighten the fog and cornering lamp screws until fully seated. Ensure not to strip the fog and cornering lamps screws.
3. Install the electrical connection to the fog and cornering lamp.
4. Use plastic tie-wrap to secure the connector to the fog and cornering lamp.
5. Install the wire harness to the loom on the fog and cornering lamp.
Fog And Cornering Lamp Replacement: Installation Procedure:
6. Install the cornering lamp socket to the fog and cornering lamp.
7. Lower the vehicle.