Camshaft Drive Sprocket Removal

Important: Some of the lobes on the camshafts may be under load from the lifters. Rotate the camshafts carefully until the camshafts are no longer under a load if applicable.





1. Install the J 42069-1 Camshaft Locking Tool between camshaft gear 1 and 2 to hold the camshaft gears in place while removing the bolt.
2. Install the J 42069-2 Camshaft Locking Tool between camshaft gear 3 and 4 to hold the camshaft gears in place while removing the bolt.





3. Remove the camshaft gear bolts.
4. Remove the camshaft gear washers.
5. Remove the camshaft gears.