Oil Pick Up/Strainer: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.

Caution: Refer to Battery Disconnect Caution in Service Precautions.

2. Raise and support the vehicle.
3. Drain the engine oil.
4. Remove the oil pan.
5. Remove the oil intake pipe bolts.
6. Remove the oil intake pipe.
7. Remove the oil intake pipe 0-ring.

INSTALLATION PROCEDURE
1. Install the oil intake pipe 0-ring.
2. Install the oil intake pipe.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the oil intake pipe bolts.
- Tighten the oil intake pipe bolts to 8 Nm (71 inch lbs).

4. Install the oil pan.
5. Lower the vehicle.
6. Refill the engine oil.
7. Reconnect the negative battery cable and reprogram the applicable accessories.