Upper Center Pillar Trim Panel

REMOVAL PROCEDURE

Trim Panel Replacement - Upper Center Pillar: Removal Procedure:

1. Remove the cover located in the center pillar upper trim finish panel to expose screw.
2. Remove pillar upper trim finish panel screw.
3. Remove the lower center pillar finish panel by pulling rearward.
4. Remove the one screw located on the lower edge of the center pillar upper trim finish panel.
5. Remove the center pillar upper trim finish panel.

INSTALLATION PROCEDURE

Trim Panel Replacement - Upper Center Pillar: Installation Procedure:

1. Install the center pillar upper trim finish panel.
2. Install the one screw located on the lower edge of the center pillar upper trim finish panel.

Tighten
Tighten center pillar lower finish panel screw until fully seated but not stripped.

3. Install the lower center pillar finish panel by align retainers into holes and snap finish panel into place.
4. Install the center pillar upper trim finish panel screw.

Tighten
Tighten center pillar upper finish panel screw until fully seated but not stripped.

5. Install the cover located in the center pillar upper trim finish panel to cover screw.